WinBook LT WinModem Drivers

General Information:

Q. Should I be using the v.90 driver for my modem?
A. Some Internet Service Providers and Online Services have not yet upgraded their hardware to the V.90 standard. Call your ISP, or Online Service to find out if they have upgraded their hardware. Using the V.90 standard with a non-V.90 provider may cause performance decreases.
Note: If you experience any new connection problems while using this driver, try going back to the 5.15 V90 modem driver.

Q. How do I know if I have the latest driver?
A. To determine which driver you have, click on Start, Settings, and then Control Panel. In Control Panel, double click on Modem. Click on the tab that says Diagnostics, then click on COM2 and then on the button that says More Info.

If you have the latest V.90 driver installed the ATI3 under Command and Response will say:
LT V.90 Data+fax+Voice+Dsvd Modem Version 5.57,
and the ATI5 line will read 5.57,0,19

If you have the latest K56flex driver installed the ATI3 line will read:
LT KData+fax+Voice+VoiceView+Dsvd Modem Version 4.15 (or higher),
and the ATI5 line will read 4.15,0,19 (or higher)

Q. Why do I no longer hear my modem dialing after updating to v5.57?
A. The installation of this driver, while improving performance, may result in a loss of modem sounds. This is normal.

These Drivers are for the XL, XLi and XL2 models running Windows 95/ 98 only!

LTMODEM515.EXE 10/98 1.1 MB	The original WinBook XL 5.15 V.90 Driver for the LT WinModem. (Windows 95 and Windows 98 only). This driver can be used if other drivers are not functioning properly.
LTMODEM522.EXE 11/30/98 1.1 MB	XL/ XLi/ XL2 Installation Download the V.90 driver. Click on Start, Find, Files or Folders. Type modem522.exe where it says named and then click on Find Now. Double click on the file named modem522.exe, this will bring up a program to extract the files. Click on Unzip to extract the files to the default directory of C:\DRIVERS\MODEM\V90. Once the files have finished extracting a message will pop up that says 31 files unzipped successfully. Click on OK. Setup will automatically begin. Click Next and the files will automatically be copied. Click on Finish to restart your computer.
LTMODEM549.EXE 8/2/99 1.1 MB	XL/ XL2 Installation Download the V.90 driver. Once downloaded, double click on the file modem549.exe. Once the files have finished extracting, the install program will run. Click on Finish to restart your computer. As the computer reboots, tap the Delete key repeatedly to enter the BIOS. Use the arrow keys to highlight Peripheral Setup and then press Enter. The first item is COM2(Modem Port). It may be Disabled. Use the PGUP key to toggle the choices until it reads 2F8H. Then press Esc, then F10, and press Enter. The modem named changed from LT WinModem to Lucent Win Modem. You may need to update your ISP connection to recognize the newer driver. XLi Installation: Download the V.90 driver from our website. Once downloaded, double click on the file modem549.exe. Once the files have finished extracting, the install program will run. Click on Finish to restart your computer. As the computer reboots, tap the F2 key repeatedly to enter the BIOS. Use the arrow keys to highlight Advanced and then press Enter. Highlight Peripheral Setup and press Enter. Find the listing for Modem. It may be Disabled. Use the F5 key to toggle the choices until it reads Enabled. Make sure that the Base I/O Address is 2F8H. Make sure that the first DMA Channel is DMA5 and the second DMA Channel is DMA6. Then press Esc, then F10, and press Enter. The modem named changed from LT WinModem to Lucent Win Modem. You may need to update your ISP connection to recognize the newer driver.
LTV557W.EXE 10/22/99 2.48 MB	XL/ XL2 Installation Download the V.90 driver from our website. Once downloaded, double click on the file LTV557W.exe. Once the files have finished extracting, the install program will run. Click on Finish to restart your computer. As the computer reboots, tap the Delete key repeatedly to enter the BIOS. Use the arrow keys to highlight Peripheral Setup and then press Enter. The first item is COM2(Modem Port). It may be Disabled. Use the PGUP key to toggle the choices until it reads 2F8H. Then press Esc, then F10, and press Enter. XLi Installation: Download the V.90 driver from our website. Once downloaded, double click on the file LTV557W.exe. Once the files have finished extracting, the install program will run. Click on Finish to restart your computer. As the computer reboots, tap the F2 key repeatedly to enter the BIOS. Use the arrow keys to highlight Advanced and then press Enter. Highlight Peripheral Setup and press Enter. Find the listing for Modem. It may be Disabled. Use the F5 key to toggle the choices until it reads Enabled. Make sure that the Base I/O Address is 2F8H. Make sure that the first DMA Channel is DMA5 and the second DMA Channel is DMA6. Then press Esc, then F10, and press Enter.
MODFIX.EXE 1/16/98 25 KB	This will correct Modem problems incurred after the uninstall of Internet Explorer 4.0. For use with Windows 95 ONLY.
XLMOD.EXE 2/13/98 1.1 MB	This is the latest KFLEX Modem Information File for the 56K internal modem. This is NOT a V90 modem driver. This modem driver is for Windows 95 or Windows 98.