WinBook Tech Article
For more information visit www.winbookcorp.com
Subject: Installation of MGI DVD Player Software version 5.0 on Windows ME and Windows 2000
Keywords: {Keywords}
Tech Article Number: WBTA13000007

NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.


You will need the following things to reinstall on this machine:

  • MGI DVD Player Software version 5.0 CD

1.  Put the MGI DVD Player software CD into the CD-ROM  You will need to make sure no other programs are running at this time.

2.  The Windows Installer should auto run and the license agreement will appear.

3.  You will need to accept the License Agreement after reading it to continue, by not accepting the agreement you will be unable to install the program.

4.  Click YES to continue past the License Agreement.

5.  The Welcome window will appear, click NEXT.

6.  The Choose Destination Location window will now appear, click NEXT.

7. Setup will now install the necessary software to run the MGI DVD Player.

8.  The  MGI Registration window will now appear, you can choose to enter the information and register now or register later.

9.  Setup will now be complete, click OK.

10.  You should have an MGI icon on the desktop, you may now use the MGI DVD player.


Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.

©2007 IPSG. All rights reserved. PowerSpec and WinBook are registered trademarks of Micro Electronics, Inc. Policies