NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

Description: Display looks like it’s in safemode in Windows Me on the WinBook Z1

1. Click the start button, click  settings, click control panel.
2. Click the display icon, click the settings tab.
3. Make sure the colors are set to high color 16bit, and the screen area is set to 1024*768.
4. To set the colors click the Drop down arrow to change.
5. To set the screen area just slide the arrow over to more.
6. Restart the Computer.
7. STOP HERE if the display looks normal if not continue.
8. Restart the computer while the computer is rebooting tap the F8 Key twice per second, until the Windows Me start menu comes up.
9. Use the down arrow key to move to Safemode press the Enter key.
10. Wait until the Computer boots up there will be a box that says Windows is running in safemode Click OK.
11.  Right click on the My Computer Icon, Click Properties, then click the Device Manager Tab.
12. Click the + next to Display adaptor, Highlight the ATI Rage Mobility-M3 2x AGP, then click the Remove button, Also Remove anything else there.
13.  Restart the Computer.
14.  Windows will now detect new hardware and install the drivers for you new hardware then prompt you to reboot Click Yes.
15.  Continue only if a hardware Wizard comes up looking for the drivers
16.  Click next Choose specify location and type this path in C:\Drivers\Video\M3Me\ATIDrive Click OK.
17.  It will now install the Video Drivers and prompt you to Restart the Computer.
18.  The Computers display should restart normal.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.