NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

You will needs the following things to install the patch on this machine 

I386 Patch and Service Pack 1 CD

Changing The Boot Sequence to allow booting from the I386 Patch CD.

1. As the computer is starting up, you will see the message Press F2 for Setup. Press the F2 key until you see the blue Setup Screen.
2. Use the Right Arrow key to move to the Boot Menu (along the top of the screen).
3. Use the Up and Down Arrow keys to Highlight ATAPI CD-ROM.
4. Press the Plus (+) key to move ATAPI CD-ROM to the top of the list.
5. Press F10 to save changes. When asked if you wish to save changes, press Y and then Enter.

Recover I386 Directory

1. Ensure that the WinBook I386 Patch CD is in the CD-ROM drive and restart the computer
2. Read the welcome screen thoroughly and then press OK.
3. Double click on the icon for Recover I386 Directory.
4. Click OK to start recovery process.
5. When recovery is complete press OK, then press OK again.

Restore Windows 2000 Service Pack 1

1. Double click on the icon for Restore Windows 2000 Service Pack 1.
2. Click OK to start restore process.
3. When restore is complete press OK, then press OK again.
4. Removed the I386 Patch CD, and press ctrl-alt-del to restart windows.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.