NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

Installing the battery in the WinBook J1 computer

1. Make certain that the unit is completely shut down and that the ac adapter is unplugged from the back of the computer.
2. Turn the unit upside down, so that the bottom is facing up.
3. Place the lock switch on the side with the unlock picture.
4. Place the battery in the battery slot. The end of the battery with the foot goes in first and to the front of the unit. You will see that the battery connections will line up with the connections in the computer.
5. Push the release switch to the other side (towards the side of the unit) and the battery will drop in place. Press down on the battery gently to make sure that it is secure.
6. Place the lock switch on the side with the closed lock picture.

Removing the battery in the WinBook J1 computer

1. Make certain that the unit is completely shut down and that the ac adapter is unplugged from the back of the computer.
2. Turn the unit upside down, so that the bottom is facing up.
3. Place the lock switch on the side with the unlock picture.
4. Push the release switch to the other side (towards the side of the unit) and the battery will lift up.
5. Grasp the battery and pull it out of the unit.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.