NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

1. Turn off the computer and disconnect the AC adapter. Remove the main battery.
2. Turn the computer over so that the rear ports are facing you. The RAM compartment will be a small compartment approximately 2"x1".
3. Remove the screw that secures the RAM compartment cover. Slide the cover in the direction of the arrow to reveal the empty memory socket.
   
   
   
4. To install the new memory card, hold the card with its gold edge connector toward the edge connector slot of the compartment. In order to help you orient the card, the edge connector has been made with two unequal-length sections.
5. Holding the card at a shallow angle, insert the edge connector into the slot. When the card is fully inserted, the gold edge connector should not be visible. 
6. Press the card downward until it is flat. You should hear an audible click as the latches of the connector secure the card in place.
7. Replace the RAM compartment cover and secure it with the screw.
8. Replace the battery and the AC adapter and power the computer on. The additional RAM should be automatically recognized.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.