NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

Once the recovery disc(s) has been created, they can be used to reinstall Windows in the event of un-repairable software issues or hard drive failures. This article will walk through the steps necessary to reload Windows onto the hard drive.

NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

1. Insert the first recovery CD or DVD into the optical drive.
2. Power on the computer or restart the computer if it is already on.
3. The computer should automatically start from the recovery media.
4. If the hard drive contains a recovery partition there will be a message asking to run from the recovery from the hard drive or the disc. Select "Run program from disc " and then click Next

5. At the "Welcome to System Recovery" screen, click Next.

6. There are four system recovery options. The two that will be covered in this article are:
   • Recovery with automatic data backup- This option will recovery Windows to its factory original condition while saving all of the data files to C:\Backup. This option should be attempted if there is data on the drive that may be recoverable.
   • Full factory recovery- This option reinstalls Windows to it factory original condition. WARNING! All data files and software will be deleted from the hard drive except what came on the computer from the factory.
   
   Select an option and the click Next.

Recovery with automatic data backup

1. Select Yes, and then click Next.

2. When the recovery finishes click Finish to restart the computer.

3. The files that were backed up can be accessed by opening "Computer", opening "C:\", and then opening "Backup."

Full factory recovery

1. Select Yes, and then click Next.

2. Click Finish to restart the computer when the recovery is complete.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.