NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

1. Before you do the following, you need to have the IrDA 2.0 drivers installed. If there is an Infrared icon in Control Panel, they are installed. If you do not have an infrared icon do the following. Otherwise, skip to step 11.
2. Click on the Start button, go up to Settings, and over to Control Panel. Double click on Add New Hardware.
3. Click Next and when Windows asks you if you want to search for new hardware, select No and click Next.
4. For the Hardware types, select Infrared and click Next.
5. Click Next again.
6. For Manufacturers, select Standard infrared devices and for Models, select Built-in Infrared port on laptop or desktop and then click Next.
7. Select Generic Ir Serial Port (Com3) for the physical port and click Next.
8. Ensure that Infrared Serial (COM) port is set to COM4 and Infrared printer (LPT) port is set to LPT3 and click Next.
9. Windows will now copy some files and find new hardware. Click Finish when prompted.
10. Restart your computer.
11. Click on the Start button, go up to Settings, and over to Printers.
12. If your printer is already installed, Right click on the printer and click on Properties. Click on the Details tab and change the port to LPT3. If your printer is not already installed, Double click Add Printer. Follow through the Add Printer Wizard and when asked which port to use, choose LPT3.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.