NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

1. Go to Start, Settings, and Control Panel. In the Control Panel go to the User icon and double click on it.
2. This will open the Enable multi-user Settings box. Press Next.
3. Enter a name for the profile and press Next.
4. Enter a password and confirm it. Remember that passwords are case sensitive. Press Next.
5. This will open the Personalized Settings box, select the items you wish to be set up in this profile and the method. Press Next.
6. Press Finish. Windows will set up the settings, and prompt you to restart the computer.
7. You are now able to select the user profile and password to start in Windows when the unit starts.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.