NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

If your floppy disk drive begins to exhibit excess floppy drive access when Windows 95 loads you must clear the document history in Windows.

1. Click on the Start button, then go up to Settings, then over to Task bar.
2. Select the Start Menu Programs tab and press Clear in the Documents menu area. This will clear your document history and stop the excess floppy drive access when you reboot.

Note: Virus scanners can cause your floppy drive to access, by performing a final scan, when you shut down.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.