NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

1. From the Start menu, click Settings then click Control Panel. In Control Panel double click the System icon, and then click the Device Manager tab.
2. Click on the plus sign in front of CD-ROM.
3. You should see Toshiba CD-ROM Xm-1602b.
4. Highlight the CD-ROM driver, then click the properties button. Next click on the settings tab.
5. Remove or add the check mark next to Auto insert notification. Then click on the OK button. If you are prompted to reboot, click Yes.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.