NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

If you had the 3Com575TX Cardbus PC Card working in Windows 95 and when upgrading to Windows 98 the 3Com575TX PC Card is no longer configured correctly. You will need to update the BIOS to XL 1.04.. You will find this on the home page of www.winbookcorp.com in the NEW page. This will correct interrupt request conflicts that is causing the Texas Instruments TI-1131 PCI Cardbus Controller PCMCIA slots in the unit and the 3Com575TX not to be configured.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.