NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

1. Insert the USB 2.0 Dock CD into the CD-ROM drive.
2. Plug the A/C adapter into the wall and then into the Pocket Dock.
3. Plug the USB cable into the Pocket Dock.
4. Plug the USB cable into the USB port on the computer.
5. Windows will begin to find new hardware.
6. During the installation of new hardware a window will appear say that it has found IEEE-1284 Controller. Click on the Next button.
   
   
   
7. A window will appear asking what you want Windows to do. Choose "Search for the best driver." and then check the Next button.
   
   
   
8. The next window will say "Windows will search for new drivers." Uncheck all of the boxes except Specify a location. In the space provided below that type in "D:\Driver" (D representing your CD-ROM drive). Then click the Next button.
   
   
   
9. The next window will say "Windows is now ready to install the best driver." Click on the Next button.
   
   
   
10.  Now it will say "Windows has finished installing the software that your new hardware device requires." Click on the Finish button.
    
    
    
11. Windows will now detect a USB Device.
12. Follow the exact same steps above to install this device.
13. Once you have finished installing the USB Device (Prolific USB-to-Serial Comm Port) Windows will detect a USB Human Interface Device.
14. Click on the Next button for the window that says "This wizard searches for new drivers for: USB Human Interface Device."
15. On the next window choose the option to "Search for the best driver." and then click Next.
16. On the next window remove the check marks from all of these boxes and then click Next.
17. The next window should say "Windows is now ready to install the best driver." If it does not, click on the back button and check the box for "specify a location." Insert your Windows 98 CD into your CD-ROM drive. In the space provided below type in "D:\win98" (D representing your CD-ROM drive) then click Next.
18. Once Windows is done installing this device click on the Finish button.
19. Windows will now detect another USB Device.
20. Follow steps 14 through 18 once more to finish installing the rest of the drivers.
21. You are now finished installing the USB 2.0 Pocket Dock on your Windows 98 computer.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.