NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

1. While your computer is on, press the Fn key and F4 key together. This will put your unit into suspend.
2. Please note whether your unit suspends to a black screen instantly (DRAM) or if it brings up a progress screen (DISK) while suspending.
3. Plug your PS/2 mouse into the back of your unit.
4. Bring your unit of suspend. If you noted the screen went black instantly press any key to resume. If you noted that there was a progress screen press your power button once.
5. Your PS/2 mouse should now be detected by the Computer.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.