NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

1. Plug in the Intellimouse to the serial port in the back of the unit.
2. Turn on your computer and boot into Windows 95
3. Click on Start, go up to Settings and click on the Control Panel.
4. Open Add New Hardware, and click on Next twice. This will start the new hardware detection.
5. When Windows 95 is finished, click on Details and a Standard Serial Mouse is listed. Click on Finish. The Intellimouse should be working.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.