NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

PC Card Laptop Requirements

Before installing the Intel® PRO/Wireless 2011 PC card, check your laptop computer for the following required minimum configuration requirements:

1. A computer with a Type II PC card slot.
2. A CD-Rom drive.
   
   Windows 2000 Installation for the Intel® PRO/Wireless Windows driver:

1. Obtain The correct Windows installation media
2. Verify the PRO/Wireless 2011 PC Card is installed
3. Obtain the PRO/Wireless Windows driver installation CD

Intel recommends updating the PRO/Wireless 2011 PC Card to the latest firmware. Use the WLAN Update utility to update the firmware. Refer to the Wireless LAN Utilities User's Guide included in the installation CD for instructions on using WLAN Update. To download the latest firmware, go to: http://support.intel.com

General PC Card Installation

Installation and removal methods vary for different laptop computers. Refer to your owner's manual for specific instructions.

To install the PC Card:

1. Start your computer.
2. Insert the PC card in the laptops PCMCIA socket
3. Align and Slide the PC card until it firmly seats. When fully inserted the PC Card antenna and LED will be the only thing showing from the socket.
   

1. Insert the CD for Intel PRO/Wireless 2011 LAN PC card into your CD-ROM drive.
2. This CD has an auto run feature and will open a window to explain some of the features of your wireless PC Card. (Shown Below)
   
   
   
3. Minimize this window. Once you minimize the above window you will see "Add New Hardware Wizard" window
   
   
   
4. When the Found New Hardware dialog box displays, Click Next.
   
   
   
5. Select the Search for a suitable driver for my device button. Click Next.
   
   
   
6. Specify the location of the Intel driver files. Click Next.
   
   
   
7. Click Next when a message displays stating Windows has found the required device.
   
   
   
8. A progress bar displays showing the progress of the driver file downloading. When the driver is download is complete, Click Next.
   
   NOTE: The Microsoft Digital Signature Not Found dialog box could appear at this point of installation. A Microsoft digital signature is required for the driver installation. Click Yes to continue with the driver installation.
   
   
   
   
9. Enter the default network ESSID (101), (without the parentheses), or your network ESSID in the Intel Easy Setup window. Click OK.
   
   
   
10. The Found New Hardware dialog box displays again stating that Windows has finished installing the software required for this device. Click OK.
11. Restart the computer when prompted by Windows 2000.

Installing the PRO/Wireless 2011 LAN PC card Utility.

1. Once your computer has restarted, Click Start, then Run.
   
   
   
2. In the run dialog box Type D:\, Click Browse.
   
   
   
3. Double-Click on the Utilities Folder.
   
   
   
4. Select Setup.exe, Press Open.
   
5. The Run window will come back into view with the path and file in the box. Click OK.
   
   
   
6. The Welcome screen appears, Click Next.
   
   
   
7. Click Yes, for the Software License Agreement.
   
   
   
8. Fill in the Name and Company boxes, Click Next
   
   
   
9. Verify the destination location, Click Next.
   
   
   
10. Select Typical, Click Next
    
    
    
11. Select Accessories, Click Next.
    
    
    
12. Enter the default network ESSID (101) or your network ESSID in the Wireless LAN Profile Wizard-ESSID. Click Next.
    By clicking next the Utility program will copy to your hard drive.
    
    
    
13. Hear you have the option to view the Read Me file. If you do, just keep the check in the box and Click Finish; otherwise remove the check in the Box, Click Finish.
    
    
    
14. Click OK, to restart your computer. After you computer is restarted, you will find the icon for the Utility program in "My Computer".
15. To put the icon on the desktop, Right Click on the Utility Icon.
16. On the menu Left Click Shortcut.
    
    
    
17. Click Yes, to add the shortcut icon to the Desktop. The icon is now on your desktop.
    

To configure your PC Card, use your Quick Installation Guide that came with the device.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.