|
WinBook Tech Article For more information visit www.winbookcorp.com |
|
| Subject: | Converting a FAT32 partition to NTFS in Windows 2000 |
| Keywords: | File system, security, Fdisk |
| Tech Article Number: | WBTA09000117 |
|
|
|
|
NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process. |
|
|
|
|
|
Note: Before you attempt to change the file system used on any
partition make sure that you back any information. If there is a
problem during the conversion process you could lose all information on
the partition.
Note: If the password is lost for the Windows 2000 there is no way to retrieve the information that is on the system once the NTFS file system is installed. |
|
|
|
|
|
Your feedback is greatly appreciated. If you have noticed any problems
with this tech article, or if you feel that something is not clear enough,
please E-mail our Technical Support department by clicking on the link
below. Please include the Technical Article Number and the specific area
that you feel is inaccurate. Thank you. Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote. ©2007 IPSG. All rights reserved. PowerSpec and WinBook are registered trademarks of Micro Electronics, Inc. Policies |
|