NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

Changing The Boot Sequence to allow booting from the Restore CD.

As the computer is starting up, you will see the message Press DEL for Setup. Press the DEL key until you see the blue Setup Screen. Use the Down Arrow key to move to the Advanced CMOS Setup menu. Press the ENTER key once. Use the Down Arrow key to highlight BOOT SEQUENCE. Press the PgUp key till the setting is CD-ROM,A:,C:. Press the ESC key once. Press the F10 key once. When asked if you wish to save changes, press Y and then Enter.
Format and Recover Hard Drive

WARNING! Using this option will remove all data from the computer. If you wish to recover Windows and not Format the Hard Drive, then follow the Recover Hard Drive Without Format instructions below.

1. Ensure that the WinBook XL2 Restore CD is in the CD-ROM drive and restart the computer.
2. Read the warning screen thoroughly and then press OK.
3. Double click on the icon for Format and Recover Hard Drive.
4. Read the warning screen thoroughly and then press OK.
5. When prompted to Proceed with Format (Y/N)? Press Y and then click Enter.
6. When the image has completely copied to the hard drive it will prompt you to press OK to restart the computer.
7. Once windows loads it will prompt you to insert your registration information. Once this information has been inserted Win98 will ask you for the Product Key. Enter the number from the Windows 98 certificate of Authenticity. Enter the number and click Next.

Recover Hard Drive Without Format

1. Ensure that the WinBook XL2 Restore CD is in the CD-ROM drive and restart the computer.
2. Read the warning screen thoroughly and then press OK.
3. Double click on the icon for Recover Hard Drive Without Format.
4. Read the warning screen thoroughly and then press OK.
5. When the image has completely copied to the hard drive it will prompt you topress OK to restart your system. When you see this message remove the restore CD from your CD-ROM drive. Then press OK to restart the computer.
6. Once windows loads it will prompt you to insert your registration information. Once this information has been inserted Win98 will ask you for the Product Key. Enter the number from the Windows 98 certificate of Authenticity and click Next.
   

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.