NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

General Information: You can use the XL Restore CD to reinstall Windows 98 back to the factory shipped conditions. The subject of this WinBook Tech Article, covers using the CD to install on a new hard drive or to restore your original drive to factory shipped condition.

WARNING! Restoring the Windows 98 master image will delete all data currently on your hard drive.

In order to proceed you will need to secure the following items:

• The WinBook XL Restore CD.
• Your Windows 98 certificate of authenticity

If you do not have your certificate of authenticity do not continue with this WinBook Tech Article until you have it. You will not be able to install Windows until you insert these numbers.

Changing The Boot Sequence to allow booting from the Restore CD.
As the computer is starting up, you will see the message Press DEL for Setup. Press the DEL key until you see the blue Setup Screen. Use the Down Arrow key to move to the Advanced CMOS Setup menu. Press the ENTER key once. Use the Down Arrow key to highlight BOOT SEQUENCE. Press the PgUp key till the setting is CD-ROM,A:,C:. Press the ESC key once. Press the F10 key once. When asked if you wish to save changes, press Y and then Enter.

This WinBook Tech Article is divided into two Sections, Partitioning and Restoring. If you are installing onto a new hard drive then you should start with the Partitioning section. If you are Re-imaging your original drive then skip to the section on Restoring.

PARTITIONING

1. Insert the WinBook XL Windows 98 Restore CD into your CD-ROM drive.
2. Restart the computer.
3. At the main menu press the 1 key to activate option #1 for HDPrep (create a suspend to disk partition).
4. Press the spacebar to continue past last chance to stop message.
5. After the suspend to disk partition is created the computer will restart on its own.
6. At the main menu press the 2 key to activate option #2 for FDISK.
7. Press the spacebar at the last chance to quit screen.
8. Press Y to enable large disk support. Then press the enter key.
9. At the FDISK menu press the 1 key to create DOS partitions, and press enter.
10. Press #1 to create primary DOS partition, then press enter.
11. It will then ask if you want to use the entire drive for this partition. Hit Y for yes, then press, enter.
12. After the Primary DOS partition is created it will tell you that in order for the changes to be made you must restart the computer. Press the esc key to restart.

RESTORING

1. WARNING! Make sure that there are no PCMCIA cards plugged into the system when attempting to restore the image on the hard drive. Having cards in at this time could cause the system to become unstable and crash.
2. Make sure the WinBook XL Restore CD is in the CD-ROM drive and restart the computer.
3. Determine what size hard drive is in your computer.
4. If the drive is a 4GB then press 3 to Restore XL Windows 98 4GB hard disk drive only.
5. Press 4 to Restore WinBook XL Windows 98 on all other hard disk drives.
6. At the warning screen press the spacebar key to continue.
7. If the system prompts for a password insert EZPW for the password. If not continue to the next step.
8. Click on the restore button. Then click on the yes button.
9. Your machine will then begin the process of installing the Win98 master image on to your hard drive.
10. When the image has completely copied to the hard drive it will prompt you to hit ctrl+alt+delete to restart your system. When you see this message remove the restore CD from your CD-ROM drive. The press ctrl+alt+del to restart the computer.
11. Once windows loads it will prompt you to insert your registration information (Name and Windows Product Key). Once this information has been inserted Win98 will be ready for use.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.