NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

1. 'Make sure your AmbiCom Installation/Diagnostics Diskette is version 2.10. If it is not, Please contact WinBook Technical Support.'
2. 'Insert the Installation/Diagnostics Diskette in to your floppy drive first, and then insert your AmbiCom card in to one of the PCMCIA slots.'
3. 'A window will pop up showing that new hardware was detected and then Windows will start the installation wizard. '
4. 'Another window will pop up with a message informing you it will complete the installation of the AmbiCom Inc-AMB8002. Click next to proceed. '
5. 'Windows will copy files from AmbiCom disk. Next Windows will indicate that the following updated driver for this device, AmbiCom Combo Ethernet PC Card (AMB8002), was found. Click Finish and then click OK.'
6. 'Windows will then look for the driver AMB8002.SYS on the Windows CD-ROM. You will need to tell Windows to look on the floppy disk in the A: drive. Just type A: in the dialog box. '
7. 'Windows will now prompt you to set up your network information. Click OK and enter the correct information in the three fields then click OK again to continue. You may need to talk to your System or Network administrator for this information.'
8. 'Once the installation is finished Windows will ask you to restart your computer. To do so, click Yes.'
9. 'Your AmbiCom card is now set up.'

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.