NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

The Following lines are required in your Config.sys file for PCMCIA support in DOS or Windows 3.1x. If you have installed Cardsoft to a directory other than C:\cardsoft, then change the path accordingly.

DEVICE=C:\DOS\HIMEM.SYS

DEVICE=C:\EMM386.EXE NOEMS X=D000-DFFF

DEVICE=C:\CARDSOFT\SSCIRRUS.EXE

DEVICE=C:\CARDSOFT\CS.EXE

DEVICE=C:\CARDSOFT\CSALLOC.EXE

DEVICE=C:\CARDSOFT\CARDID.EXE

These files will activate the PC Card socket. There will probably be additional drivers required by the PCMCIA Card itself. In order to get more information on any additional drivers, please call the manufacturer of the card or reference the manual. This has been provided as a convenience for our customers. WinBook Technical Support does not support the MS-DOS operating system on the WinBook LM.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.