NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

1. If you don’t have Cardsoft drivers you can download them from the Technical Support website at http://www.systemsoft.com/
2. To download the file from the web page,
3. Follow the instructions on the page to download and extract the file to a disk for use.
4. Once you have the file downloaded and extracted, restart the computer in MS-DOS mode.
5. From the Start menu, click Shutdown, then choose Restart in MS-DOS mode.
6. Type A:\ and press ENTER.
7. Type INSTALL and press ENTER.
8. Press ENTER again.
9. If the first option is highlighted press ENTER. If not use the arrow keys so that the first option is highlighted and press ENTER.
10. Press the down arrow key and press ENTER.
11. A prompt will appear on the screen of \cardsoft. Press ENTER.
12. Press ENTER again.
13. The screen will state that it is creating subdirectories.
14. The screen will state that it is copying files.
15. Press ENTER for updating the config.sys file.
16. Press ENTER for updating the system.ini file.
17. Press ENTER again.
18. Press ENTER again to reboot.
19. Remove the floppy disk out of the floppy drive.
20. Press ENTER the unit will restart.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.