NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

1. Open the TranXit Pro software and click on the PrintPro Tab.
2. Click on PrintPro on the menu bar and choose Install and restart the computer when asked.
3. Open TranXit Pro and click on the PrintPro Tab.
4. Click on PrintPro on the menu bar and choose Enable.
5. Click on PrintPro and choose Always Enable.
6. Click on PrintPro and choose Printer Connection. This will Open the Printers.
7. If your printer is already installed, Right click on it and click on Properties. Click on the Details tab and change the port to TranXit.prn.
8. If your printer is not already installed, Double click on Add Printer. Follow through the Add Printer Wizard and when asked which port to use, choose TranXit.prn.
9. Restart the computer.

Now every time you boot the unit it will ask if you want to enable TranXit for background printing. Choose Yes. If you choose No, It will disable Printer Redirection and you will need to enable it again (steps 5 and 6.)

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.