NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

Components required:

• AT style keyboard
• AT to PS/2 keyboard adapter cable
• WinBook SX/DX

1. The PS/2 port on the back of the WinBook SX/DX is wired for a PS/2 mouse. A normal PS/2 style keyboard will not function properly. In order to get an AT style keyboard to work you have to get a special AT to PS/2 keyboard adapter cable for the SX/DX.
2. Make sure that the machine is powered off.
3. Attach the AT to PS/2 keyboard adapter cable to an AT style keyboard

Note: An AT style keyboard has the larger 5-pin din adapter and a PS/2 style keyboard has the smaller 9-pin mini din adapter. You need to find a keyboard with the larger 5-pin din connector.

4. Attach the other end of the adapter cable to the PS/2 port located in the back of the machine.
5. Power on the WinBook. The keyboard should work with no further modifications required.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.