NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

1. Shut down the unit or place it in hibernate mode. Disconnect the AC Adapter. Close the LCD panel and turn the unit upside down. The front of the unit should be toward you.
   
   
   
2. Slide both release latches towards the outer edges of the unit. Note: The right release latch is a fixed position latch. This latch will remain in place when moved. The left release latch is a spring latch and will return to the locked position when released.
   
   
   
3. Gently slide the battery out and away from the unit.
   
   
   
4. Line up the new battery for insertion into the battery bay channel. Gently slide the battery towards the center of the unit until an audible click indicates that the latches have been secured.
   
   
   
5. Reconnect the AC Adapter.
   

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.