NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

1. Turn the computer off and disconnect the power adapter and any peripherals.  Remove the battery from the unit as well.
2. Turn the computer over, with the front facing you. The ram compartment is located directly above the battery release latch.  It is held in place by two small Phillips screws.  Remove the screws from the compartment cover.

3. Remove the cover and you will now see the RAM socket. To install the new memory card, hold the card with its gold edge connector toward the edge connector slot of the ram socket.
4. Holding the card at a shallow angle, insert the edge connector into the slot as shown below.

5. Push the card fully into the socket.  Then press the card downward until it is flat.  You should hear an audible click as the latches of the connector secure the card in place. 
6. Replace the compartment cover and the screws holding it in place.
7. Restart the computer. The X4 will automatically recognize the new RAM.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.