NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

1. Download the RST_2040.EXE file below to your C:\ directory.
2. Next, make a bootable diskette.
3. To make a bootable diskette, go to Start, Programs, MS DOS prompt. Put a blank disk in your drive and at the C:\Windows> prompt type SYS A: and hit Enter.
4. This will transfer the system files to this disk.
5. Close the MS DOS window.
6. Go to the C:\ directory were you downloaded the RST_2040.EXE file. Double click on the file. Click the Install button. This will copy the reset file to your bootable diskette.
7. Leave the disk in the computer and restart.
8. You will boot to a Command prompt.
9. At this prompt, type RST_2040.EXE and hit Enter.
10. The reset will run. Remove the disk and restart the computer.
    Note: The reset takes less than a second to run. You will not see anything on the screen. You will just go back to a c:\ prompt.
11. Hit the Del key to go into the Bios and run Battery Calibration immediately after running the reset program.
12. Please remove any external hardware, including port replicator, before running the calibration program.

Download the reset utility here

RST_2040.EXE

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.