NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

1. Plug in the Palm Pilot cradle to the back of the XLi to the serial port which will be com1.
2. Place the Palm Pilot software CD into the CD-ROM drive.
3. Go to the run command under the start button, then type d:/setup then hit enter.
4. Click on the install button. Then click the install button one more time.
5. Click the next button. Enter your user name, then hit next one more time.
6. Then chose the Palm Pilot program components you want to install on to you WinBook then click next.
7. Then click next, then next one more time after that.
8. Then click the yes button so the program can detect your WinBook available com ports. At this point the program may or may not say that a modem is an attached to the com1 port. Highlight the com1 port weather there is or there isn’t a modem seen on the port and click ok.
9. Then the program will ask if you want to view the read me file.
10. If you click no, then click on the return to the Palm Pilot CD button, then it will take you back to the mane menu.
11. Then you if you click the quit button two times it will take you out of the installation software.
12. Now your Palm Pilot is reedy for use. To synchronize the information on the Palm Pilot and your WinBook computer click on the hotsync button.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.