NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

The WinBook XL has two Universal Serial Bus (USB) ports. USB is a new standard for connecting external devices which provides both power and automatic device recognition. Up to 127 USB devices may be connected and recognized. Devices may be connected in daisy chain fashion as long as the devices themselves have a USB port.

1. Insert the end of the cable from the USB device into the USB port on the back of the WinBook XL.
2. The device will be detected when the WinBook XL power is on. If off, turn the computer on. You may be asked for a driver disk. This disk should be supplied with the USB product.

• Currently available USB devices include keyboards, mice, scanners, and Printers
• Powered USB hubs are available for connecting multiple USB devices lacking their own USB ports
• Your computer can be on or off to connect a USB device

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.