NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

1. Shutdown the computer.
2. Power on the unit; press F2 when prompted at the bottom of the screen to enter Setup.
3. Press the right arrow and go to the power menu.
4. Change power savings to "Customize" by using the "-".
5. Change all other options to OFF or Disabled. Alarm resume time should be 00:00:00.
6. Press Esc then press Enter twice; the computer will reboot.
7. Go to the Start, Shut Down, and Restart in MS-DOS mode.
8. Remove AC power from the unit and let unit run until the unit shuts off.
9. Remove the battery.
10. Let the battery sit until it is cool (20 - 30 minutes).
11. Without inserting battery, Plug in the ac adapter and turn the unit on.
12. Insert the battery into the unit with the unit running.
13. Let the battery charge 2-3 hours if the computer is shut down.
14. Let the battery charge 4-6 hours if the computer is being used during the charging process.
15. Repeat steps 7 through 14 two more times.

We recommend doing steps 7 through 14 once a month as part of your regular computer maintenance.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.