NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

1. Access system BIOS by pressing F2 as the computer is turning on.
2. Press the right arrow until the Power menu is highlighted.
3. Using the down arrow, highlight PM Control.
4. Press the space bar until the setting changes to OFF.
5. Press ESC and the press Enter twice.
6. The system will save settings and restart.
7. When windows loads, click on start and shutdown.
8. Choose Restart in MS-Dos Mode, and click yes.
9. Detach the AC Adapter and let computer run until the battery runs out and it powers off.
10. Remove the battery from the computer and let it cool for about 20-30 minutes.
11. Insert the AC Adapter and turn on the computer.
12. Insert the battery and let it charge to 100%.

To maintain consistent usage of the battery we recommend following these steps once every 40-60 days.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.