WinBook Tech Article
For more information visit www.winbookcorp.com
Subject: International Voltage Requirements for the WinBook XP5 Dock and XP5 Notebook Computer
Keywords: {Keywords}
Tech Article Number: WBTA00040696

NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.


Your WinBook XP5 Laptop and Docking is compatible with a broad range of voltages and cycles as found throughout the world. The only requirement is that the current be of the AC type, DC current is not useable. The voltage ranges are from 100 to 240 volts and from 47 to 63 Hz or cycles. The dock with the unit installed can take up to 3 amps. According to your specific location you may need to purchase an adapter to convert the USA specific plug to the local standard. If the local voltages and currents fall within the above ranges then you should be safe in operating your WinBook and Dock.


Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.

©2007 IPSG. All rights reserved. PowerSpec and WinBook are registered trademarks of Micro Electronics, Inc. Policies