|
WinBook Tech Article For more information visit www.winbookcorp.com |
|
| Subject: | WinBook XP 14.4 Internal Modem Will Not Work on a Pulse Line |
| Keywords: | {Keywords} |
| Tech Article Number: | WBTA00030665 |
|
|
|
|
NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process. |
|
|
|
|
|
The WinBook XP 14.4 modem will not work on a pulse only phone line. No matter what software settings are used it will still try to use tone dialing. It will not break the tone and begin dialing. It just dials over the tone and does not connect. This modem will work on a tone line only. |
|
|
|
|
|
Your feedback is greatly appreciated. If you have noticed any problems
with this tech article, or if you feel that something is not clear enough,
please E-mail our Technical Support department by clicking on the link
below. Please include the Technical Article Number and the specific area
that you feel is inaccurate. Thank you. Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote. ©2007 IPSG. All rights reserved. PowerSpec and WinBook are registered trademarks of Micro Electronics, Inc. Policies |
|