NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

Almost all trackball problems can be resolved by cleaning the trackball. Simply use a pointed object (a ballpoint pen, paper clip, push pin, etc.) to turn the ring around the ball counter-clockwise, take the ring out and remove the ball. Use hot water only to wash the ball (other solutions, even alcohol, will leave a film on the ball, which impairs its performance.) Use a foam Q-tip and isopropyl alcohol to clean the well that the ball sits in, paying particular attention to cleaning the rollers and ball rest points. Now reassemble the ball, and you're done.

If this does not solve the problem, then call Technical Support at (800) 468-1225.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.