NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

The first time you use your WinBook notebook, use your AC power adapter. This will allow your battery to fully charge.

NOTE: The AC adapter included in the package is approved for this notebook. Using other AC power adapters may damage the notebook or other devices on the notebook.

1. Unpack the accessory package to find the AC adapter and power cord.

2. Attach the power cord to AC power brick.

3. Plug the DC end of the adapter to the notebook and the male end of the power cord to the electrical outlet.

When disconnecting the AC adapter:

1. Unplug the power cord from the electrical outlet first.

2. Unplug the connector from the notebook.

   NOTE: When unplugging the power cord, always hold the connector part of the cord. Never pull the cord directly!

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.