|
WinBook Tech Article For more information visit www.winbookcorp.com |
||||||
| Subject: | Using the touchpad on the WinBook TL30 notebook | |||||
| Keywords: | Touch, cursor, pointing device, tap to click, scroll, drag | |||||
| Tech Article Number: | WBTA0000350009 | |||||
|
|
||||||
|
NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process. |
||||||
|
|
||||||
|
The Notebook PC’s integrated touchpad pointing device is fully compatible with all two/three-button and scrolling knob PS/2 mice. The touchpad is pressure sensitive and contains no moving parts; therefore, mechanical failures can be avoided. A device driver is still required for working with some application software. IMPORTANT! Do not use any objects in place of your finger to operate the touchpad or else damage may occur to the touchpad’s surface. Using the Touchpad Light pressure with the tip of a finger is all that is required to operate the touchpad. Because the touchpad is electrostatic sensitive, objects cannot be used in place of a finger. The touchpad’s primary function is to move the cursor around or select items displayed on the screen with the use of a fingertip instead of a standard desktop mouse. The following illustrations demonstrate proper use of the touchpad. Moving The Cursor Place a finger in the center of the touchpad and slide in a direction to move the cursor.
Clicking/Tapping With the cursor over an item, press the left button or use a fingertip to touch the touchpad lightly, keeping a finger on the touchpad until the item is selected. The selected item will change color. The following 2 examples produce the same results.
Double-clicking/Double-tapping This is a common skill for launching a program directly from the corresponding icon that is selected. Move the cursor over the executable icon or shortcut, press the left button or tap the pad twice in rapid succession, and the system launches the corresponding program. If the interval between the clicks or taps is too long, the operation will not be executed. The double-click speed can be set using the Windows Control Panel “Mouse.” The following 2 examples produce the same results.
Dragging Dragging means to pick up an item and place it to the desired location anywhere on the screen. Move the cursor over an item, and while keeping the left button depressed, move the cursor to the desired location, then release the button. Or, simply double-tap on the item and hold while dragging the item with a fingertip. The following illustrations produce the same results.
Caring for the TouchpadThe touchpad is pressure sensitive. If not properly cared for, it can be easily damaged. Take note of the following precautions.
|
||||||
|
|
||||||
|
Your feedback is greatly appreciated. If you have noticed any problems
with this tech article, or if you feel that something is not clear enough,
please E-mail our Technical Support department by clicking on the link
below. Please include the Technical Article Number and the specific area
that you feel is inaccurate. Thank you. Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote. ©2007 IPSG. All rights reserved. PowerSpec and WinBook are registered trademarks of Micro Electronics, Inc. Policies |
||||||