NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

Some software may require a certain amount of video memory. The amount of video memory in the WinBook V-Series notebook can be changed to 16, 32, 64, or 128 MB of RAM. To change the amount of memory allocated to the display adapter, follow the instructions below:

1. Turn the computer off.
2. Press the power button to turn the computer on and then tap the DEL key about once per second as the computer turns on. This will enter the BIOS setup utility.
3. Use the right arrow key to highlight Advanced.
4. Use the down arrow key to highlight Share Memory Size and then press Enter.
5. Use the up and down arrow keys to select the desired size and then press Enter.
6. Press F10 to save changes and exit.
7. Highlight OK and then press Enter to exit the BIOS setup.
8. The video memory has now been changed to the desired size.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.