NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

To replace the battery pack, follow these steps:

1. Turn OFF the computer. Disconnect the AC cord remove the battery and disconnect all cables/devices attached to the notebook.
2. Carefully turn the notebook over and lay it on a flat surface.
3. Slide the battery security lock outward to the unlock position. (Figure 1, item 1)
4. Slide the battery release lever outward to the unlock position and while holding it in the unlock position slide the battery pack out of the computer.

5. Insert another battery pack into place and the battery release latch (Figure 1, item 2) will automatically engage into the locked position; the battery security lock must be manually engaged.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.