NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

1. Device Indicators: These LED lights display the status of the following devices and function.

1. Power Indicator: A solid green light indicates the unit is ON, if the green light is blinking the unit is in standby mode.
2. Battery Charge Indicator: A solid green light indicates the battery is fully charged and on AC power. A solid amber light indicates the battery is charging, and a blinking red light indicates that the unit's battery is almost completely discharged.
3. Wireless LAN Indicator: A solid green light indicates that the wireless card or signal is active, if it is off, then the card is disabled.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.