NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

You wish to use an External USB Numeric Keypad and enable the number lock (Numlock) function without turning on Numlock for the internal keyboard on the notebook.

1. Press F2 as the unit is starting to boot to enter the BIOS
2. With Main highlighted press the Enter key.
3. Use the down arrow to highlight Internal Numlock and press Enter to remove the check and disable the feature. This will disable the Numlock on the internal keyboard so that when Numlock is pressed it will only be enabled on an external device
4. Use the right arrow key to highlight Exit. Save Changes and Exit will be highlighted, press the Enter key to choose this option and then press the Enter key again. The computer will restart.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.